MAR2100 MIRROR CONTROLLER IC
The MAR2100 is a Driver and control IC for Maradin’s MAR1110.E dual-axis MEMS-based scanning mirror. MAR2100 is targeted for miniature laser-based displays and sensors.
MAR2100 drives and controls Maradin’s MAR1110.E dual-axis scanning mirror and generates the timing signals to synchronize the laser module through the Host, also called a Data Manipulator. As the MAR1110.E scanner has two uncoupled actuators – one for horizontal scan and one for vertical scan, MAR2100 controller IC supports both drivers.
MIRROR CONTROLLER IC MAR2100 Common Applications
MAR2100 – MEMS SCANNING MIRROR SPEC:
MAR2100 General specification
| Type | Parameter | Min | Typical Value | Max | Unit | Remarks |
|---|---|---|---|---|---|---|
General | Pixel position repeatability | 0.2 | 1 | mRad | For MAR1800S/L and MAR1500 | |
Alarm | 1 | 3 | mSec | Sensor failure | ||
Dimensions | 8x12 | cm | ||||
Input Supply Voltage | 4.8 | 5 | 5.2 | V | ||
Power Consumption | 2 | W | ||||
MAR2100 Drive & Sense specification
| Type | Parameter | Min | Typical Value | Max | Unit | Remarks |
|---|---|---|---|---|---|---|
PLL
Sense | PLL resonance trucking Frequency of MEMS | ±0.5 | Hz | |||
Modulation Frequency | 5 | MHz | ||||
A2D Resolution | 13 | Bit | ||||
Drive | D2A Resolution | 12 | Bit | |||
Driving current | ±500 | mA | Full bridge driver | |||
Programmable LUT | Multiple scan regimes |
MAR1110.E in Numbers
Maradin
Projecting the Future
Founded in
0
US granted
patent on MEMS,
control and system firmware
0
More than
0
years of
MEMS
experience
More than
0